Ultrasonic-ethanol pretreatment assisted aqueous enzymatic extraction of hemp seed oil with low Δ9-THC.

In this study, ultrasonic-ethanol pretreatment combined with AEE was developed for oil extraction from hemp seeds. The oil yield reached a maximum of 23.32 % at 200 W ultrasonic power and 30 min ultrasonic time, at this point, the degradation rate of Δ9-THC was 83.11 %. By determining the composition of hemp seed before and after pretreatment, it was shown that ultrasonic-ethanol pretreatment reduced the protein content of the raw material. An enzyme mixture consisting of pectinase and hemicellulase (1/1/1, w/w/w) was experimentally determined to be used, and the AEE extraction conditions were optimized using the Plackett-Burman design and the Box-Behnken. The optimal conditions were determined to be pH 5, total enzyme activity of 37,800 U/g, liquid-solid ratio of 10.4 mL/g, enzyme digestion temperature of 32 °C, enzymatic time of 189 min, and oil recovery of 88.38 %. The results of confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) showed that the emulsion formed during ultrasonic ethanol pretreatment was not uniformly distributed, and the droplets appeared to be aggregated; and the irregular pores of hemp seed increased after pretreatment. The contents of Δ9-THC and CBN in the extracted oil samples were 9.58 mg/kg and 52.45 mg/kg, respectively. Compared with the oil extracted by Soxhlet extraction (SE), the oil extracted by this experimental method was of better quality and similar in fatty acid composition.

Cannabis Roots: Therapeutic, Biotechnological and Environmental Aspects.

Since the legalization of recreational cannabis in Canada in 2018, the number of licenses for this crop has increased significantly, resulting in an increase in waste generated. Nevertheless, cannabis roots were once used for their therapeutic properties, indicating that they could be valued today rather than dismissed. This review will focus on both traditional therapeutic aspects and potential use of roots in modern medicine while detailing the main studies on active phytomolecules found in cannabis roots. The environmental impact of cannabis cultivation and current knowledge of the root-associated microbiome are also presented as well as their potential applications in biotechnology and phytoremediation. Thus, several high added-value applications of cannabis roots resulting from scientific advances in recent years can be considered to remove them from discarded residues.

Galenic formulations of Cannabis sativa: comparison of the chemical properties of extracts obtained by simple protocols using lipidic vehicles.

The growing use of Cannabis sativa as a complementary therapy to allopathic medicine has brought about the modification of laws for its use worldwide. This entails the need to harmonize the methods of galenic preparations in pharmacies and cannabis-specialized non-governmental organizations as well as for self-provision as contemplated in some current legislation, such as that of Argentina. Thus, this work aimed to study simple and efficient methods to produce medicinal cannabis oils that require low-cost equipment and few handling steps. The final formulas allowed the obtaining of preparations of known concentrations of neutral cannabinoids, total polyphenol content, total flavonoid content, and antioxidant capacity. These methods allow for the selection of convenient vehicles and access to safe medicinal products of standardized quality. Our results show that cannabis extraction can be efficiently performed by directly using long-chain lipidic vehicles as extractants, resulting in a formulation with maximized oxidizing capacity and potentially extending its durability.

Divergent synthesis of fractionated Cannabis sativa extract led to multiple cannabinoids C-&O-glycosides with anti-proliferative/anti-metastatic properties.

Here, we present an interesting, previously unreported method for fractionating a particular class of cannabinoids from the crude leaf extract of Cannabis sativa using HP-20 resins. In this study, we report a novel method of divergent synthesis of fractionated Cannabis sativa extract, which allows the generation of multiple cannabinoids C- and O-glycosides which react with the glycosyl donor 2,3,4,6-tetra-O-acetyl-d-mannosyl trichloroacetimidate (TAMTA) to create eight C- and O-ß-d-cannabinoids glycosides (COCG), which are separated by HPLC and whose structures are characterized by 1D, 2D NMR, and mass spectrometry. These glycosides exhibit improved anti-proliferative and anti-metastatic effects against numerous cancer cell lines in vitro and are more water-soluble and stable than their parent cannabinoids. The in vitro testing of the pure cannabinoids (1-4) and their C- & O-glycosides (1a-4a) and 1b-4b exhibited anti-proliferative and anti-metastatic activities against a panel of eight human cancer cell lines in contrast to their respective parent molecules. Different cancer cell lines' IC50 values varied significantly when their cell viability was compared. In addition to the others, compounds 2a, 3a, 4a, and 2b, 3b were highly potent, with IC50values ranging from 0.74 µM (3a) to 51.40 µM (4a).Although2a(1.42 µM) and3a(0.74 µM) exhibited lower IC50values in the MiaPaca-2 cell line than4a(2.58 µM). But, in addition to the comparable anti-clonogenic activity of4ain MiaPaca-2 and Panc-1 cells, it manifested remarkable anti-invasive activity than either 2a or 3a.In contrast to 2a, 2b, 3a, and 3b and their respective parent compounds,4ahad substantial anti-invasive/anti-metastatic capabilities and possessed anti-proliferative activity.The effects of 4a treatment on MiaPaca-2 and Panc-1 cells include a dose-dependent increase in the expression of E-cadherin and a significant decrease in the expression of Zeb-1, Vimentin, and Snail1. Our results demonstrate that divergent synthesis of fractionated Cannabis sativa extract is a feasible and efficient strategy to produce a library of novel cannabinoid glycosides with improved pharmacological properties and potential anticancer benefits.

Extraction solvent selection for Cannabis sativa L. by efficient exploration of cannabinoid selectivity and phytochemical diversity.

INTRODUCTION: Cannabis sativa L. is attracting worldwide attention due to various health-promoting effects. Extraction solvent type is critical for the recovery of bioactive compounds from the plant, especially cannabinoids. However, the choice of solvent is varied and not adequately warranted elsewhere, causing confusion in involved fields. OBJECTIVE: The present work aimed to investigate the effect of extraction solvent on C. sativa (hemp) with regard to cannabinoid recovery and phytochemical profile of the extracts, considering most of the related solvents. METHODOLOGY: The majority of solvents reported for C. sativa (n = 14) were compared using a representative hemp pool. Quantitative results for major and minor cannabinoids were rapidly and reliably obtained using ultrahigh-performance liquid chromatography coupled with photodiode array detection (UPLC-PDA). In parallel, high-performance thin-layer chromatographic (HPTLC) fingerprinting was employed, involving less toxic mobile phase than in relevant reports. Various derivatisation schemes were applied for more comprehensive comparison of extracts. RESULTS: Differential selectivity towards cannabinoids was observed among solvents. MeOH was found particularly efficient for most cannabinoids, in addition to solvent systems such as n-Hex/EtOH 70:30 and ACN/EtOH 80:20, while EtOH was generally inferior. For tetrahydrocannabinol (THC)-type compounds, EtOAc and n-Hex/EtOAc 60:40 outperformed n-Hex, despite its use in the official EU method. Solvents that tend to extract more lipids or more polar compounds were revealed based on HPTLC results. CONCLUSION: Combining the observations from UPLC quantitation and HPTLC fingerprinting, this work allowed comprehensive evaluation of extraction solvents, in view of robust quality assessment and maximised utilisation of C. sativa.

Determination of Cannabinoids in Cannabis sativa Oil and Infused Ice Cream by LC-DAD Method.

BACKGROUND: Cannabis sativa is known to produce a class of terpenophenolic compounds named cannabinoids. The two main ones are cannabidiol (CBD) and tetrahydrocannabinol (THC), which have therapeutic properties. In the development of cannabis-based preparations, it is important to have suitable analytical methods for the analysis of the principal cannabinoids. OBJECTIVE: This study aimed to develop and validate a simple and rapid HPLC method with photodiode array detection for determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, including a stability study. METHOD: Chromatographic separation of CBD and THC was performed with a C18 column, with a mobile phase consisting of acetonitrile and water with formic acid (80 + 20 v/v) in isocratic elution mode, with detection at 208 nm for CBD and 280 nm for THC and 1.0 mL/min flow rate. RESULTS: The method was linear over a range of 1-5 µg/mL for CBD, and 20-100 µg/mL for THC; the relative standard deviation was <3.6%, the recovery ranged between 98.8 and 102.5% for oil and between 84 and 94% for ice cream, QL was 0.33 µg/mL for CBD and 2.30 µg/mL for THC, and the assay demonstrated adequate selectivity. CBD and THC were stable for at least 28 days under light protection at 22°C, 4°C, and -20°C in the oil and for at least 60 days at -20°C in the ice cream. CONCLUSIONS: The results showed that the method was suitable for quantitative determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, and it is useful for quality control purposes. HIGHLIGHTS: The method is simple and fast, and it is useful for the quality control of a new product corresponding to an ice cream based on a Cannabis sativa oil extract.

Cannabis Science and Therapeutics: An Overview for Clinicians.

Cannabis-based therapeutics have garnered increasing attention in recent years as patients seek alternative treatments for various medical conditions. This narrative review provides a comprehensive overview of the science behind the medical use of cannabis, focusing on the medical evidence for commonly treated conditions. In addition, the review addresses the practical considerations of using cannabis as a therapeutic agent, offering insights into dosing strategies, variations in cannabinoid formulation, and individual patient responses. Precautions, adverse consequences, and drug interactions are also discussed, with a focus on patient safety and the potential risks associated with cannabis use.

Aqueous Extracts from Hemp Seeds as a New Weapon against Staphylococcus epidermidis Biofilms.

This study investigated the antibiofilm activity of water-soluble extracts obtained under different pH conditions from Cannabis sativa seeds and from previously defatted seeds. The chemical composition of the extracts, determined through GC-MS and NMR, revealed complex mixtures of fatty acids, monosaccharides, amino acids and glycerol in ratios depending on extraction pH. In particular, the extract obtained at pH 7 from defatted seeds (Ex7d) contained a larger variety of sugars compared to the others. Saturated and unsaturated fatty acids were found in all of the analysed extracts, but linoleic acid (C18:2) was detected only in the extracts obtained at pH 7 and pH 10. The extracts did not show cytotoxicity to HaCaT cells and significantly inhibited the formation of Staphylococcus epidermidis biofilms. The exception was the extract obtained at pH 10, which appeared to be less active. Ex7d showed the highest antibiofilm activity, i.e., around 90%. Ex7d was further fractionated by HPLC, and the antibiofilm activity of all fractions was evaluated. The 2D-NMR analysis highlighted that the most active fraction was largely composed of glycerolipids. This evidence suggested that these molecules are probably responsible for the observed antibiofilm effect but does not exclude a possible synergistic contribution by the other components.

Rapid electrochemical lateral flow device for the detection of Δ9-tetrahydrocannabinol.

Cannabis is a plant that is harmful and beneficial because it contains more than 400 bioactive compounds, and the main compounds are Δ9 tetrahydrocannabinol (THC) and cannabidiol (CBD). Currently, cannabis extracts are used in medicine, but the amount of THC as a main psychoactive component is strictly regulated. Therefore, the ability to rapidly and accurately detect THC is important. Herein, we developed a sensitive electrochemical method combining a rapid lateral flow assay (LFA) to detect THC rapidly. An electrochemical LFA device was constructed by attaching a screen-printed electrode inside a lateral-flow device to exploit the remarkable binding of THC to the cannabinoid type 2 (CB2) receptor in the test zone. The ferrocene carboxylic acid attached to the monoclonal THC antibody acts as an electroactive species when it binds to the THC in the sample before it flows continuously to the CB2 receptor region on the electrode. Under optimal conditions, the detection time is within 6 min and the devise shows excellent performance with a detection limit of 1.30 ng/mL. Additionally, the device could be applied to detect THC in hemp extract samples. The results obtained from this sensor are similar to the standard method (HPLC) for detecting THC. Therefore, this proposed device is useful as an alternative device for the on-site determination of THC because it is inexpensive, portable, and exhibits high sensitivity.

An electrochemical approach for the prediction of Δ9-tetrahydrocannabinolic acid and total cannabinoid content in Cannabis sativa L.

Two electrochemical sensors are proposed here for the first time for the fast screening of cannabinoids in Cannabis sativa L. plant material (inflorescences). The accurate control of cannabinoid content is important for discriminating between recreational, i.e. illegal, and fibre-type C. sativa samples, which differ mainly according to the amount of Δ9-tetrahydrocannabinol (Δ9-THC) and Δ9-tetrahydrocannabinolic acid (Δ9-THCA). Two screen printed electrodes obtained using different electrode materials were tested for the analysis of extracts from recreational and fibre-type C. sativa and their performance was compared with a consolidated method based on high-performance liquid chromatography (HPLC). The voltammetric responses recorded in the different samples reflected the compositional differences of the recreational and fibre-type extracts in accordance with the results of HPLC analyses. Moreover, the quantification of Δ9-THCA and the total cannabinoid content on the basis of the intensity of the peaks of the voltammograms was possible through a simple and fast electrochemical procedure.

A validated method for detection of cannflavins in hemp extracts.

A selective and sensitive liquid chromatography mass spectrometry assay was developed for the detection of cannflavin A, B, and C in hemp extract specimens. A deuterated analog cannabidiol-D3 was used as the internal standard and the isocratic method used a mobile phase consisting of acetonitrile and water with 0.1 % formic acid [83:17]. Detection was carried out by electrospray positive ionization in single-ion monitoring mode through a C-18 analytical column. The assay (total run time <20 min) had excellent linearity and a lower limit of quantification of 0.5 µg/mL and a limit of detection of 0.25 µg/mL with a 10 µL injection. The method possessed suitable measures of stability, sensitivity, and selectivity for detecting cannflavins in several specimen types. The method was successfully applied to the analysis of samples of cannflavin release from prototype topical formulations.

[Optimized chromatographic methods for the identification and quantification of terpenes in Cannabis sativa oil for medicinal use] / Métodos cromatográficos optimizados para la identificación y cuantificación de terpenos en aceite de Cannabis sativa de uso medicinal.

Introduction: Cannabis sativa is a plant species with numerous active principles, so the list of its therapeutic uses is expanding. In this sense, there are numerous evidences of the possible medicinal use of terpenes, as well as their synergism with cannabinoids (entourage effect). Thus, as more countries contemplate the legalization and authorization of medical cannabis, the number of cannabis extraction and analysis laboratories is increasing to meet the demand, requiring adequate analytical tools. Methodology: In response to numerous inquiries from physicians, analytical laboratories and users, the PROBIEN chromatography laboratory has selected two methods for the analysis of terpenes in Cannabis oil by gas chromatography technique (GC-FID). The methods are described using HP-5 and Innowax columns. The external standard method was used for the quantitative determination of ß-Pinene, Myrcene, p-Cymene, Limonene, Linalool, α-Terpineol, Nerol and Geraniol. Results: good peak separation and reproducibility were observed, appropriate for the identification and quantification of the main terpenes in Cannabis extracts. The area/concentration ratio was linear in the range of 0.0005 to 2.0 mg/ml. Main conclusion: The described methods allow the identification and quantification of the major terpenes in Cannabis oil for an adequate quality control.

Introducción: Cannabis sativa es una especie vegetal con gran número de principios activos, por lo que la lista de sus usos terapéuticos se está ampliando. En este sentido, hay numerosas evidencias del posible uso medicinal de los terpenos, así como del sinergismo de ellos con los cannabinoides (efecto séquito). Así, a medida que más países contemplan la legalización y autorización del cannabis medicinal, el número de laboratorios de extracción y análisis de cannabis aumenta para satisfacer la demanda, requiriéndose herramientas analíticas adecuadas. Metodología: En respuesta a numerosas consultas de médicos, laboratorios de análisis y usuarios, el laboratorio de cromatografía del PROBIEN ha seleccionado dos métodos para el análisis de terpenos en aceite de Cannabis por la técnica de cromatografía gaseosa (GC-FID). Se describen los métodos usando las columnas HP-5 e Innowax. Se empleó el método del estándar externo para la determinación cuantitativa de ß-Pineno, Myrceno, p-Cymeno, Limoneno, Linalool, α-Terpineol, Nerol y Geraniol. Resultados: se observó una buena separación de picos y reproducibilidad, apropiadas para la identificación y cuantificación de los principales terpenos en extractos de Cannabis. La relación área/concentración fue lineal en el rango de 0,0005 a 2,0 mg/ml. Conclusión principal: los métodos descritos permiten la identificación y cuantificación de los terpenos mayoritarios en aceite de Cannabis para un control de calidad adecuado.

Phytochemical Composition and Antioxidant Activity of Various Extracts of Fibre Hemp (Cannabis sativa L.) Cultivated in Lithuania.

The phytochemistry of fibre hemp (Cannabis sativa L., cv. Futura 75 and Felina 32) cultivated in Lithuania was investigated. The soil characteristics (conductivity, pH and major elements) of the cultivation field were determined. The chemical composition of hemp extracts and essential oils (EOs) from different plant parts was determined by the HPLC/DAD/TOF and GC/MS techniques. Among the major constituents, ß-caryophyllene (≤46.64%) and its oxide (≤14.53%), α-pinene (≤20.25%) or α-humulene (≤11.48) were determined in EOs. Cannabidiol (CBD) was a predominant compound (≤64.56%) among the volatile constituents of the methanolic extracts of hemp leaves and inflorescences. Appreciable quantities of 2-monolinolein (11.31%), methyl eicosatetraenoate (9.70%) and γ-sitosterol (8.99%) were detected in hemp seed extracts. The octadecenyl ester of hexadecenoic acid (≤31.27%), friedelan-3-one (≤21.49%), dihydrobenzofuran (≤17.07%) and γ-sitosterol (14.03%) were major constituents of the methanolic extracts of hemp roots, collected during various growth stages. The CBD quantity was the highest in hemp flower extracts in pentane (32.73%). The amounts of cannabidiolic acid (CBDA) were up to 24.21% in hemp leaf extracts. The total content of tetrahydrocannabinol (THC) isomers was the highest in hemp flower pentane extracts (≤22.43%). The total phenolic content (TPC) varied from 187.9 to 924.7 (average means, mg/L of gallic acid equivalent (GAE)) in aqueous unshelled hemp seed and flower extracts, respectively. The TPC was determined to be up to 321.0 (mg/L GAE) in root extracts. The antioxidant activity (AA) of hemp extracts and Eos was tested by the spectrophotometric DPPH● scavenging activity method. The highest AA was recorded for hemp leaf EOs (from 15.034 to 35.036 mmol/L, TROLOX equivalent). In the case of roots, the highest AA (1.556 mmol/L, TROLOX) was found in the extracts of roots collected at the seed maturation stage. The electrochemical (cyclic and square wave voltammetry) assays correlated with the TPC. The hydrogen-peroxide-scavenging activity of extracts was independent of the TPC.

Determination of phytocannabinoids in cannabis samples by ultrasound-assisted solid-liquid extraction and high-performance liquid chromatography with diode array detector analysis.

The characterisation of cannabis plants, especially the determination of specific phytocannabinoids, has gained enormous importance in the last decade, mainly due to the recent changes in cannabis control in several countries or states. This is particularly relevant for the forensic, medical or recreative industry to have a rapid, inexpensive, and reliable methodology to identify and quantify phytocannabinoids. Furthermore, spiking cannabis products with Δ8-tetrahydrocannabinol (THC) is a contemporary trend that demands improving or replacing current methods to include this cannabinoid. The current study presents an ultrasound-assisted solid-liquid extraction followed by high-performance liquid chromatography with diode array detection (HPLC-DAD) methodology to identify and quantify Δ9-THC, Δ8-THC, cannabidiol, cannabinol, Δ9-tetrahydrocannabinolic acid and cannabidiolic acid in cannabis products. The herbal samples were extracted with ethanol:acetonitrile (50:50, v:v) by ultrasonication using only 50 mg of sample. The plant oils were diluted in ethanol. The optimised procedure allowed ≈100% extraction efficiency of the target cannabinoids. The validation assays showed that the method is linear (R2 > 0.997), selective, sensitive, precise and accurate, with suitable limits of detection (0.125-0.250 µg mL-1) and quantification (0.500 µg mL-1). The method was successfully applied to cannabis samples, demonstrating its suitability for routine analyses. This contribution follows the current demand for fast and straightforward analysis services of this plant and its derivatives, using small amounts of sample. The present study compares very favourably against other works, particularly in regards to the extraction efficiency, speed of the overall procedure, method sensitivity, and ability to monitor Δ8-THC spiked samples using a novel solvent mixture.

Effective isolation of cannabidiol and cannabidiolic acid free of psychotropic phytocannabinoids from hemp extract by fast centrifugal partition chromatography.

Cannabidiol (CBD), together with its precursor cannabidiolic acid (CBDA), is the major phytocannabinoid occurring in most hemp cultivars. To ensure the safe use of these compounds, their effective isolation from hemp extract is required, with special emphasis on the elimination of ∆9-tetrahydrocannabinol (∆9-THC) and ∆9-tetrahydrocannabinolic acid (∆9-THCA-A). In this study, we demonstrate the applicability of fast centrifugal partition chromatography (FCPC) as a challenging format of counter-current preparative chromatography for the isolation of CBD and CBDA free of psychotropic compounds that may occur in Cannabis sativa L. plant extracts. Thirty-eight solvent mixtures were tested to identify a suitable two-phase system for this purpose. Based on the measured partition coefficients (KD) and separation factors (α), the two-phase system consisting of n-heptane:ethyl acetate:ethanol:water (1.5:0.5:1.5:0.5; v:v:v:v) was selected as an optimal solvent mixture. Employing UHPLC-HRMS/MS for target analysis of collected fractions, the elution profiles of 17 most common phytocannabinoids were determined. Under experimental conditions, the purity of isolated CBD and CBDA was 98.9 and 95.1% (w/w), respectively. Neither of ∆9-THC nor of ∆9-THCA-A were present; only trace amounts of other biologically active compounds contained in hemp extract were detected by screening against in-house spectral library using UHPLC-HRMS.

THC-Reduced Cannabis sativa L.-How Does the Solvent Determine the Bioavailability of Cannabinoids Given Orally?

The bioavailability levels of cannabidiol (CBD) and tetrahydrocannabinol (THC) determine their pharmacological effects. Therefore, for medical purposes, it is essential to obtain extracts containing the lowest possible content of the psychogenic component THC. In our extract, the CBD/THC ratio was 16:1, which is a high level compared to available medical preparations, where it is, on average, 1:1. This study assessed the bioavailability and stability of CBD and THC derived from Cannabis sativa L. with reduced THC content. The extract was orally administered (30 mg/kg) in two solvents, Rapae oleum and Cremophor, to forty-eight Wistar rats. The whole-blood and brain concentrations of CBD and THC were measured using liquid chromatography coupled with mass spectrometry detection. Much higher concentrations of CBD than THC were observed for both solvents in the whole-blood and brain after oral administration of the Cannabis sativa extract with a decreased THC content. The total bioavailability of both CBD and THC was higher for Rapae oleum compared to Cremophor. Some of the CBD was converted into THC in the body, which should be considered when using Cannabis sativa for medical purposes. The THC-reduced hemp extract in this study is a promising candidate for medical applications.

Goods and Bads of the Endocannabinoid System as a Therapeutic Target: Lessons Learned after 30 Years.

The cannabis derivative marijuana is the most widely used recreational drug in the Western world and is consumed by an estimated 83 million individuals (∼3% of the world population). In recent years, there has been a marked transformation in society regarding the risk perception of cannabis, driven by its legalization and medical use in many states in the United States and worldwide. Compelling research evidence and the Food and Drug Administration cannabis-derived cannabidiol approval for severe childhood epilepsy have confirmed the large therapeutic potential of cannabidiol itself, Δ9-tetrahydrocannabinol and other plant-derived cannabinoids (phytocannabinoids). Of note, our body has a complex endocannabinoid system (ECS)-made of receptors, metabolic enzymes, and transporters-that is also regulated by phytocannabinoids. The first endocannabinoid to be discovered 30 years ago was anandamide (N-arachidonoyl-ethanolamine); since then, distinct elements of the ECS have been the target of drug design programs aimed at curing (or at least slowing down) a number of human diseases, both in the central nervous system and at the periphery. Here a critical review of our knowledge of the goods and bads of the ECS as a therapeutic target is presented to define the benefits of ECS-active phytocannabinoids and ECS-oriented synthetic drugs for human health. SIGNIFICANCE STATEMENT: The endocannabinoid system plays important roles virtually everywhere in our body and is either involved in mediating key processes of central and peripheral diseases or represents a therapeutic target for treatment. Therefore, understanding the structure, function, and pharmacology of the components of this complex system, and in particular of key receptors (like cannabinoid receptors 1 and 2) and metabolic enzymes (like fatty acid amide hydrolase and monoacylglycerol lipase), will advance our understanding of endocannabinoid signaling and activity at molecular, cellular, and system levels, providing new opportunities to treat patients.

Protective Effects of Hemp (Cannabis sativa) Root Extracts against Insulin-Deficient Diabetes Mellitus In Mice.

The pharmacological potential of industrial hemp (Cannabis sativa) has been widely studied. However, the majority of studies have focused on cannabidiol, isolated from the inflorescence and leaf of the plant. In the present study, we evaluated the anti-diabetic potential of hemp root water (HWE) and ethanol extracts (HEE) in streptozotocin (STZ)-induced insulin-deficient diabetic mice. The administration of HWE and HEE ameliorated hyperglycemia and improved glucose homeostasis and islet function in STZ-treated mice (p < 0.05). HWE and HEE suppressed ß-cell apoptosis and cytokine-induced inflammatory signaling in the pancreas (p < 0.05). Moreover, HWE and HEE normalized insulin-signaling defects in skeletal muscles and apoptotic response in the liver and kidney induced by STZ (p < 0.05). Gas chromatography-mass spectrometry analysis of HWE and HEE showed possible active compounds which might be responsible for the observed anti-diabetic potential. These findings indicate the possible mechanisms by which hemp root extracts protect mice against insulin-deficient diabetes, and support the need for further studies geared towards the application of hemp root as a novel bioactive material.

Cannabicitran: Its unexpected racemic nature and potential origins.

Cannabicitran is a cannabinoid found in levels up to ~10% in commercial "purified" cannabidiol (CBD) extracts. The structure of this natural product was first reported more than 50 years ago. However, few studies have investigated cannabicitran or its origin despite the rapidly increasing interest in the use of cannabinoids for the treatment of a wide range of physiological conditions. Following on a recent detailed NMR and computational characterization of cannabicitran, our group initiated ECD and TDDFT studies aimed at unequivocally determining the absolute configuration of cannabicitran present in Cannabis sativa extracts. To our surprise, we discovered the natural product was racemic, raising questions around its presumed enzymatic origin. Herein, we report the isolation and absolute configuration of (-)-cannabicitran and (+)-cannabicitran. Several possible scenarios for production of the racemate in the plant and/or during extract processing are discussed.

Nutrient profile, amino acid digestibility, true metabolizable energy, and indispensable amino acid scoring of whole hemp seeds for use in canine and feline diets.

The use of various hemp-derived products has been rapidly growing in the human nutrition industry and has sparked great interest in using these ingredients for companion animals as well. Thorough research is needed to determine the ingredient and safety standards required for AAFCO approval of hemp ingredients. In order to be effectively incorporated into pet food products, we must determine the nutrient content, quality, and utility of these ingredients in pet species. The objective of this study was to evaluate the nutrient composition of seeds from four different varieties of hemp, NWG 452, NWG 331, NWG 2730, X-59, and determine protein quality and true metabolizable energy using a cecectomized rooster model. The seeds were similar in macronutrient composition, with small variations in acid hydrolyzed fat, crude protein, total dietary fiber and gross energy content, as well as amino acid and long-chain fatty acid profiles. All essential amino acids were present in concentrations that exceeded the NRC (2006) recommended allowances for adult dogs and cats at maintenance with the exception of tryptophan. The long-chain fatty acid profile presented a favorable ratio of omega-6 to omega-3 fatty acids of close to 3.5:1. The results of the cecectomized rooster assay indicated no significant difference in the standardized amino acid digestibility of the indispensable amino acids among the seed varieties (P > 0.05). A significant difference in the true metabolizable energy corrected for nitrogen was observed among the seeds (P < 0.05), following the pattern of higher acid hydrolyzed fat and lower total dietary fiber content resulting in higher metabolizable energy. An adapted calculation of digestible indispensable amino acid score was made to determine protein quality of the hemp seeds using AAFCO nutrient profiles and NRC recommended allowances for adult dogs and cats at maintenance as reference points. The resulting scores determined tryptophan to be the first limiting amino acid and indicate that hemp seeds alone do not meet all the amino acid requirements for adult dogs and cats at maintenance, and would need a complimentary protein source for practical use in companion animal diets. The data from this study suggest that hemp seeds may provide a beneficial source of fat, protein, and dietary fiber, with consideration to differences in nutrient profile among seed varieties. However, further investigation in vivo is needed to determine the safety and efficacy of utilizing hemp in the diets of both canines and felines.

Hemp products have become popular in the human food and health industry over the past few years. Due to this, a growing interest in using hemp ingredients in animal products has developed as well. There is a need to investigate the nutritional properties and potential utility of hemp seeds in food products for companion animals in order for them to be consumed safely and effectively. Four different varieties of hemp seed were evaluated and found to have similar fat, fiber, and protein content as well as protein quality. The results indicate that hemp seeds may be an advantageous ingredient in the development of pet food products, but a more in depth evaluation using pet species is necessary to confirm this.